*There is a known issue at Rogers since possibly Saturday night, affecting calling. TCC calling appears to be working well on our side, both in and out. We have been advised that Rogers is working to correct the problem.*
How to Install AMINO STB
support TCC Nov 25, 2021
Before you begin setting up your AMINO STB
Review the contents:
• Set-Top Box & power cord
• HDMI Cable
• Remote Control & 2 batteries
Ensure you follow the steps in order
• Open remote & remove battery protection
• Have your WiFi password & TCCTV login and password handy
Self-Install AMINO STB
Place your Set-Top Box near your TV.
Connect the power cord to your Set-top Box and then connect it to an electrical outlet.
Connect the HDMI cable to your Set-Top Box, then connect to an HDMI port on your TV. Make a note of which HDMI port you use.
Turn on your TV and your Set-Top Box. The blue light will indicate the STB is on.
*If you don’t see instructions on screen …
Using your TV remote, select the HDMI input used to connect your TV to the Set-Top Box.
Once activated, follow the on-screen prompts. (It may take several minutes for the system to activate.)
If prompted to pair your new Remote Control with your Set-Top Box, point the remote at Set-Top Box; ensure these two buttons are held until the blue STB light is on. This will likely happen automatically.
Click begin & follow on-screen prompts.
Search and select your TCC Wi-Fi Network. Enter your Wi-Fi password.
Continue to follow the on-screen prompts to complete the set up.